ER65 EMULSION

-------Acid Rosin Size

 

Description

ER65 is a kind of anionic rosin emulsion size for paper and board, over a pH range from 4.5 to 6.5. This product is mainly for weak acid sizing of low and medium grades of paper and board.

 

Advantages

* High sizing efficiency

* Cut down alum and size demand by 20% to 40%

* Less sensitive to anionic ash in wet end

* Good sizing in wet end containing second fiber

* Reducing foaming and pitch / beneficial to wire and felt

* Raise up production efficiency and accepted –rate

 

Typic properties

Appearance

milk white emulsion

Solids content

39±0.5wt%

PH

5.2±0.8

Viscosity

Under 25 mPa.s  (at 25 ℃)

Density

1.02----1.20 g/cm3

Ionic character

Anionic

Mechanical stability

Good

Shelf life 

6 months

 

 

 

Application

ER65 can be fed by pump without dilution , It can be also diluted with aroud 5 times of fresh water.

The recommended addition point is at the level box or before the fan pump or mixing chest where pulp slurry of relatively high consistency. The dosage suggested is from 0.5% to 1.5% on the basis of dry fiber, alum load of 3% to 8% being required .

The model sequency is showed as follows:

A:   alum ===> ER65 ===> talc ====> retention aid

B:    talc ====> alum ====> ER65 ====> retention aid

 

Technical service

Further suggestion will be presented based on your production line before application .

Our technical service branch will be keep in touch with you , pay much attention to your application.

 

Package and storage

ER65 emulsion is available in 200L drums or 1000L container. Product shelf life is over 6 months. Prevent contact with elevated or over-low temperatures, required surrounding temperature is between 6℃ to 40℃ .

 

Safety information

This product is non-hazardous, passing the safety determination by the Testing Center of Tongji University authorized by Shanghai Bureau of Railway Communication.

 

Shanghai University Nimble-tech Co. Ltd 

Address: Room  402A, Science & Technology Park, Shanghai University ,

 149 Yanchang load, Shanghai city, P.R. China, 200072

Fax / Telephone:86-021-56334269, 36033271,     FAX:36038271

http://www.higradechemicals.com.cn    Email: zhuyqk@citiz.net